Description
Synchronize up to seven instruments (five sinewave, one squarewave and one slave output) to a frequency reference input. The reference input frequency is 10 MHz and the output frequency is exactly the same as the input. The PTS50 incorporates AGC (automatic gain control) so that a 10 MHz input can be varied from -10 dBm to +20 dBm without the outputs changing by more than 0.4 dB. AGC is ideal to remove AM or noise that may be on the input. Inputs as low as -30 dBm still produce a useable output. The pure sinewave output (harmonics are typically 70 dB down) enables the PTS50 to work in the most demanding applications.
Outputs
There are five 10 MHz, sinewave outputs. Each 10 MHz output is isolated from the input and each other. Therefore, the reference oscillator connected to the PTS50 is protected against load variations, short circuits etc. that may be applied to the outputs. The additional squarewave output can be switched in frequency from 10 MHz, 5MHz, 2 MHz, 1 MHz, 100 kHz and 1 pps. This output is ideal for instruments that do not use a 10 MHz timebase. A rear slave output can be connected to a second PTS50 (or more) to give additional outputs.
Reviews
There are no reviews yet.